Edelbrock 1425 METERING JETS

#ad
Edelbrock 1425 #ad - Step in the rod changes the effective jet area between high and low manifold vacuum conditions. Gasoline type. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. Drill size is 0 The jet and rod is changed to get the cruise air / fuel ratio leaned out. For altitude or high test fuel main metering jet can be replaced with leaner than standard metering jets.

092 inch. The edelbrock metering jet is designed for use with the Edelbrock Performer Series and Thunder Series AVS carburetors. Made of brass.

#ad



Edelbrock 1426 METERING JETS

#ad
Edelbrock 1426 #ad - Made of brass. Drill size is 0 Jet and rod is changed to get the cruise air/fuel ratio leaned out. 095 inch. The edelbrock metering jet is designed for use with the Edelbrock Performer Series and Thunder Series AVS carburetors. Gasoline type. The step in the rod changes the effective jet area between high and low manifold vacuum conditions.

Circuits are checked for proper sizing and the calibration is checked for proper jets, primary and secondary metering rods. The jet and rod is changed to get the cruise air / fuel ratio leaned out.

#ad



Edelbrock 1464 SPRING ASSORTMENT

#ad
Edelbrock 1464 #ad - Jet and rod is changed to get the cruise air/fuel ratio leaned out. It provides optimum performance to the carburetor. Drill size is 0 Circuits are checked for proper sizing and the calibration is checked for proper jets, primary and secondary metering rods. The springs are used to fine-tune the carburetor. The step-up spring is made of steel.

Edelbrock 1464 SPRING ASSORTMENT #ad - 095 inch. Steel Material. Made of brass. Gasoline type. The edelbrock carburetor step-up spring kit contains one of each 3 Hg blue, 5 Hg orange, 4 Hg yellow, 7 Hg pink and 8 Hg plain springs.

#ad



Edelbrock 1424 METERING JETS

#ad
Edelbrock 1424 #ad - Jet and rod is changed to get the cruise air/fuel ratio leaned out. Made of brass. Steel Material. Circuits are checked for proper sizing and the calibration is checked for proper jets, primary and secondary metering rods. Drill size is 0 The step in the rod changes the effective jet area between high and low manifold vacuum conditions.

Edelbrock 1424 METERING JETS #ad - Drill size is 0095 inch. The edelbrock metering jet is designed for use with the Edelbrock Performer Series and Thunder Series AVS carburetors. 089 inch. Made of brass. Circuits are checked for proper sizing and the calibration is checked for proper jets, primary and secondary metering rods. Gasoline type. Jet and rod is changed to get the cruise air/fuel ratio leaned out.

Gasoline type. The jet and rod is changed to get the cruise air / fuel ratio leaned out.

#ad



Edelbrock 1453 METERING ROD

#ad
Edelbrock 1453 #ad - Metering rod is used to control the air/fuel mixture. 047. Circuits are checked for proper sizing and the calibration is checked for proper jets, primary and secondary metering rods. These rods can be changed in seconds by removing the single hold-down screw and are sold as a pair. Made of brass. Since metering rods are available with different step combinations, it is possible to independently alter the air/fuel ratio for both cruise and power modes with a single rod change.

Edelbrock 1453 METERING ROD #ad - Circuits are checked for proper sizing and the calibration is checked for proper jets, primary and secondary metering rods. Diameter of the cruise and the power is 0 Steel Material. The edelbrock metering rods are designed for use with the Edelbrock Performer Series and Thunder Series AVS carburetors only and not with any other brands.

Jet and rod is changed to get the cruise air/fuel ratio leaned out. 095 inch. Gasoline type. Drill size is 0 Rods are incredibly easy to change. 047.

#ad



Edelbrock 1456 METERING ROD

#ad
Edelbrock 1456 #ad - 047. The edelbrock metering rods are designed for use with the Edelbrock Performer Series and Thunder Series AVS carburetors only and not with any other brands. Made of brass. These rods can be changed in seconds by removing the single hold-down screw and are sold as a pair. Gasoline type. 047. Rods are incredibly easy to change.

073 x 0071 and 0 . Since metering rods are available with different step combinations, it is possible to independently alter the air/fuel ratio for both cruise and power modes with a single rod change. 073 and 0 Made of brass. 089 inch. Steel Material. Drill size is 0 Drill size is 0 Jet and rod is changed to get the cruise air/fuel ratio leaned out.

Edelbrock 1456 METERING ROD #ad - Allows you to fine-tune your carburetor for optimum performance. Designed for use with the Edelbrock Performer and Thunder Series carburetors only. Metering rod is used to control the air/fuel mixture.

#ad



Edelbrock 1423 METERING JETS

#ad
Edelbrock 1423 #ad - Made of brass. Metering rod is used to control the air/fuel mixture. The edelbrock metering jet is designed for use with the Edelbrock Performer Series and Thunder Series AVS carburetors. Drill size is 0 Steel Material. The jet and rod is changed to get the cruise air / fuel ratio leaned out. 047. Diameter of the cruise and the power is 0

Edelbrock 1423 METERING JETS #ad - Jet and rod is changed to get the cruise air/fuel ratio leaned out. 089 inch. Diameter of the cruise and the power is 0095 inch. 086 inch. Jet and rod is changed to get the cruise air/fuel ratio leaned out. Drill size is 0073 and 0 Allows you to fine-tune your carburetor for optimum performance. Gasoline type. The step in the rod changes the effective jet area between high and low manifold vacuum conditions.

Allows you to fine-tune your carburetor for optimum performance. 047.

#ad



Edelbrock 1451 METERING ROD

#ad
Edelbrock 1451 #ad - Gasoline type. Gasoline type. Allows you to fine-tune your carburetor for optimum performance. Designed for use with the Edelbrock Performer and Thunder Series carburetors only. Designed for use with the Edelbrock Performer and Thunder Series carburetors only. 073 and 0 Metering rod is used to control the air/fuel mixture.

Metering rod is used to control the air/fuel mixture. 047. Designed for use with the Edelbrock Performer and Thunder Series carburetors only. Step in the rod changes the effective jet area between high and low manifold vacuum conditions. The small area at the tip of the rod is the power step and the thicker area next to it is the cruise step with a dimension of 0

Edelbrock 1451 METERING ROD #ad - 047. Jet and rod is changed to get the cruise air/fuel ratio leaned out. Diameter of the cruise and the power is 0 Diameter of the cruise and the power is 0095 inch. Circuits are checked for proper sizing and the calibration is checked for proper jets, primary and secondary metering rods. The edelbrock metering rods are designed for use with the Edelbrock Performer Series and Thunder Series AVS carburetors only and not with any other brands.

#ad



Edelbrock 1487 JET AND ROD KIT

#ad
Edelbrock 1487 #ad - Made of brass. Rods are incredibly easy to change. Gasoline type. Circuits are checked for proper sizing and the calibration is checked for proper jets, primary and secondary metering rods. Diameter of the cruise and the power is 0 Made of brass. Drill size is 0 Gasoline type. Metering rod is used to control the air/fuel mixture.

Diameter of the cruise and the power is 0 It is sold as a kit. Drill size is 0 Rods are incredibly easy to change. The performer series carburetor calibration kit includes an assortment of metering rods and jets, one pair of metering rod retaining springs and a complete assortment of step-up springs and parts needed to help you get the best performance.

Edelbrock 1487 JET AND ROD KIT #ad - Designed for use with the Edelbrock Performer and Thunder Series carburetors only. Jet and rod is changed to get the cruise air/fuel ratio leaned out. 047. Allows you to fine-tune your carburetor for optimum performance. 070 and 0089 inch. Step in the rod changes the effective jet area between high and low manifold vacuum conditions.

#ad



Edelbrock 1427 METERING JETS

#ad
Edelbrock 1427 #ad - Circuits are checked for proper sizing and the calibration is checked for proper jets, primary and secondary metering rods. Jet and rod is changed to get the cruise air/fuel ratio leaned out. Metering rod is used to control the air/fuel mixture. Designed for use with the Edelbrock Performer and Thunder Series carburetors only.

Edelbrock 1427 METERING JETS #ad - Made of brass. Gasoline type. Fits with part #1406. The jet and rod is changed to get the cruise air / fuel ratio leaned out. Diameter of the cruise and the power is 0 Circuits are checked for proper sizing and the calibration is checked for proper jets, primary and secondary metering rods. Step in the rod changes the effective jet area between high and low manifold vacuum conditions.

Made of brass. Rods are incredibly easy to change. Gasoline type. 047. 073 and 0089 inch. Jet and rod is changed to get the cruise air/fuel ratio leaned out.

#ad



Edelbrock 1446 METERING ROD

#ad
Edelbrock 1446 #ad - Gasoline type. Made of brass. Allows you to fine-tune your carburetor for optimum performance. 047. Allows you to fine-tune your carburetor for optimum performance. Diameter of the cruise and the power is 0 Made of brass. Drill size is 0 Diameter of the cruise and the power is 0 Made of brass. Circuits are checked for proper sizing and the calibration is checked for proper jets, primary and secondary metering rods.

Edelbrock 1446 METERING ROD #ad - 042. Rods are incredibly easy to change. Designed for use with the Edelbrock Performer and Thunder Series carburetors only. Diameter of the cruise and the power is 0 Drill size is 0 Gasoline type. Metering rod is used to control the air/fuel mixture. These metering rods allow you to fine-tune your carburetor for optimum performance and are used to control the air/ fuel mixture.

071 and 0098 inch. 068 and 0 Rods are incredibly easy to change.

#ad