Simpson Strong-Tie TV207230 Retrofit Steel Post Base

Brand name: Simpson Strong-Tie. Item weight: 093 lb. Country of Origin: China. Item dimensions: 4. 0"l x 4. 0"w x 5. 0"h. Retrofit zmax galvanized steel Post Base, Hot Dip Galvanized Corrosion Resistant Coating.


Simpson Structural Screws SDS25112-R25 1/4-Inch by 1-1/2-Inch with 1-Inch Threaded Structural Wood Screw, 25-Pack

Head is stamped with Simpson Strong Tie Stamp and fastener length for easy identification. 3/8-inch hex head. 25 pack, 1. 5", strong drive sds structural wood screws, identification stamped into the head with length, double barrier coating for Exterior & Treated-Wood Applications, Designed For Installation In Simpson Strong Tie Connectors As Well As Wood To Wood Applications, Low Speed 1/2" Drill With A 3/8" Hex Driver Is The Recommended Tool For Installation.

Designed for installation in Simpson Strong Tie Connectors As Well As Wood To Wood Applications. Strong drive SDS Structural Wood Screws. Patented 4-cut point and type 17 point enables easy driving without pre-drilling and minimalm splitting. Low speed 1/2-inch drill with 3/8-Inch hex driver recommended for installation.

Meets icc-es esr-2236 codes. Low speed 1/2" drill with a 3/8" hex Driver Is The Recommended Tool For Installation.


Simpson Strong Tie STB2-50334 1/2-Inch by 3-3/4-Inch Bolt Wedge Anchor for Cracked and Uncracked Concrete, 25-Pack

Low speed 1/2" drill with a 3/8" hex Driver Is The Recommended Tool For Installation. Independently adjustable tri-segment clip for follow-up expansion. 3/8-inch hex head. Head is stamped with Simpson Strong Tie Stamp and fastener length for easy identification. Designed for installation in Simpson Strong Tie Connectors As Well As Wood To Wood Applications.

The strong-bolt is wedge anchor designed for optimum performance in both cracked and uncracked concrete: a requirement that the 2009 IBC places on post-installed anchors. Patented 4-cut point and type 17 point enables easy driving without pre-drilling and minimalm splitting. Meets icc-es esr-2236 codes. The strong-bolt anchor is proven to offer increased reliability in the most adverse conditions, including cracked concrete under static and seismic loading.

. Low speed 1/2-inch drill with 3/8-Inch hex driver recommended for installation. The proprietary tri-segmented clip has dual undercutting embossments on each segment which enable secondary or follow-up expansion if a crack forms and intersects the anchor location. No need for special bits or installation tools.

Dual embossments on each clip segment. Head is stamped with Simpson sign and size ID.


DEWALT DW5437 1/2-Inch x 4-Inch x 6-Inch ROCK CARBIDE SDS Plus Hammer Bit

Low speed 1/2-inch drill with 3/8-Inch hex driver recommended for installation. Meets icc-es esr-2236 codes. Installs like a standard wedge anchor. Dual embossments on each clip segment. Low speed 1/2" drill with a 3/8" hex Driver Is The Recommended Tool For Installation. Head is stamped with Simpson Strong Tie Stamp and fastener length for easy identification.

Elongated four Flute Helix for Faster Material Removal. Increased Steel Prevents Breakage. No need for special bits or installation tools. Independently adjustable tri-segment clip for follow-up expansion. Designed for installation in Simpson Strong Tie Connectors As Well As Wood To Wood Applications. Rock carbide tip for Longer Bit Life.

For use with electric or cordless rotary hammers. Used for drilling holes in poured concrete and other masonry up to 1-1/8" diameter. Head is stamped with Simpson sign and size ID. Dewalt dw5437 1/2-inch x 4-inch x 6-inch rock carbide sds plus hammer Bit Strong drive SDS Structural Wood Screws. 3/8-inch hex head.

Patented 4-cut point and type 17 point enables easy driving without pre-drilling and minimalm splitting.


Simpson Structural Screws SD10112R100 No.10 by 1-1/2-Inch Structural-Connector Screw, 100-Pack

Mechanically-galvanized coating meets ASTM B695 class 55. Independently adjustable tri-segment clip for follow-up expansion. Rock carbide tip for Longer Bit Life. Increased Steel Prevents Breakage. Head is stamped with Simpson Strong Tie Stamp and fastener length for easy identification. Dual embossments on each clip segment.

Head is stamped with Simpson sign and size ID. Shank is specifically designed to match the fastener holes in Simpson Strong-Tie connectors. Designed for installation in Simpson Strong Tie Connectors As Well As Wood To Wood Applications. No need for special bits or installation tools. 1/4-inch hex head drive reduces cam-out for easier installation.

Connectors installed with SD screw code listed under ICC-ES ESR-3096. Meets icc-es esr-2236 codes. Elongated four Flute Helix for Faster Material Removal. 3/8-inch hex head. For use with electric or cordless rotary hammers. Used for drilling holes in poured concrete and other masonry up to 1-1/8" diameter.


Simpson Strong Tie FPBB44 Black Powder-Coated 12-Gauge E-Z Base

Install with 1/4 in. Patented 4-cut point and type 17 point enables easy driving without pre-drilling and minimalm splitting. Hdg lag screws. Mechanically-galvanized coating meets ASTM B695 class 55. Installs like a standard wedge anchor. For use with electric or cordless rotary hammers. Used for drilling holes in poured concrete and other masonry up to 1-1/8" diameter.

Low speed 1/2-inch drill with 3/8-Inch hex driver recommended for installation. Allows easy installation of 4x4 wood posts on existing concrete. Material: 12 gauge finish: black powder coat allows easy installation of 4x4 wood posts on existing concrete Attach post to E-Z Spike or E-Z Base with 8-1/4" SDS screws or 1/4" HDG lag screws Attach post to E-Z Mender using 6 HDG nails or screws per part.

Diameter anchors. Connectors installed with SD screw code listed under ICC-ES ESR-3096. Sds screws or 1/4 in. Black Powder-Coat. Allows easy installation of 4 x 4 wood posts on existing concrete. Dual embossments on each clip segment. Simpson strong-tie offers a line of products designed to help make repairing and reinforcing fence posts easy and economical.




ITW 11013 Red Head Sleeve Anchor 3/8 in. x 3 in. Hex, 15-per Pack

Black Powder-Coat. Shank is specifically designed to match the fastener holes in Simpson Strong-Tie connectors. Ideal for hand rails, window frames, partitions, cabinets, shelves and pipe supports. Steel construction. Head is stamped with Simpson sign and size ID. Allows easy installation of 4x4 wood posts on existing concrete.

Patented 4-cut point and type 17 point enables easy driving without pre-drilling and minimalm splitting. Increased Steel Prevents Breakage. Independently adjustable tri-segment clip for follow-up expansion. Designed for fastening into porous concrete,  hollow or grout-filled block and brick. For use with electric or cordless rotary hammers.

Used for drilling holes in poured concrete and other masonry up to 1-1/8" diameter. Building code approved. Meets icc-es esr-2236 codes. Dual embossments on each clip segment. Install with 1/4 in. Drill bit diameter matches anchor diameter. Made from 12 gauge steel.


Simpson Strong-Tie SD9212R100# #9x2.5 Conn Screw

Low speed 1/2" drill with a 3/8" hex Driver Is The Recommended Tool For Installation. Low speed 1/2-inch drill with 3/8-Inch hex driver recommended for installation. Head is stamped with Simpson sign and size ID. Elongated four Flute Helix for Faster Material Removal. Item weight: 1. 0 lb. Optimized heat treated for strength.

Head is stamped with Simpson Strong Tie Stamp and fastener length for easy identification. Install with 1/4 in. For use with electric or cordless rotary hammers. Used for drilling holes in poured concrete and other masonry up to 1-1/8" diameter. Item dimensions: 2. 0"l x 3. 88"w x 3. 13"h. 3/8-inch hex head. Zinc-plated for added durability.

Brand name: Simpson Strong-Tie. Mechanically-galvanized coating meets ASTM B695 class 55. Easy to install in concrete with 1/2 in.


The Hillman Group 370984 Wedge Anchor, 3/8 X 3-Inch, 25-Pack

Meets icc-es esr-2236 codes. Installs like a standard wedge anchor. Rock carbide tip for Longer Bit Life. Suitable base materials are normal-weight, concrete over steel deck, sand-lightweight concrete, and grouted concrete masonry. Common applications include structural connections such as beam and column anchorage.

Patented 4-cut point and type 17 point enables easy driving without pre-drilling and minimalm splitting. Low speed 1/2-inch drill with 3/8-Inch hex driver recommended for installation. Anchor can be installed through standard fixture holes. Dual embossments on each clip segment. Nominal drill bit size is the same as the anchor diameter.

Head is stamped with Simpson sign and size ID. Low speed 1/2" drill with a 3/8" hex Driver Is The Recommended Tool For Installation. Hdg lag screws. Easy to install in concrete with 1/2 in. Zinc-plated for added durability. Strong drive SDS Structural Wood Screws. Connectors installed with SD screw code listed under ICC-ES ESR-3096.

Optimized heat treated for strength.


Simpson Strong Tie A34-100 18-Gauge Framing Angle 100-Per Box

Strong drive SDS Structural Wood Screws. Suitable base materials are normal-weight, concrete over steel deck, sand-lightweight concrete, and grouted concrete masonry. Common applications include structural connections such as beam and column anchorage. Help ensure joints are consistently straight and strong.

Anchor can be installed through standard fixture holes. Easy to install in concrete with 1/2 in. Item weight: 1. 0 lb. Sds screws or 1/4 in. Shank is specifically designed to match the fastener holes in Simpson Strong-Tie connectors. Optimized heat treated for strength. Elongated four Flute Helix for Faster Material Removal.

Brand name: Simpson Strong-Tie. No need for special bits or installation tools. Dual embossments on each clip segment. Made from 12 gauge steel. 1/4-inch hex head drive reduces cam-out for easier installation. Versatile connector for various 90 degree connections and home repair projects. Diameter anchors.


Simpson Structural Screws SD9112R100 No.9 by 1-1/2-Inch Structural-Connector Screw, 100-Pack

Sds screws or 1/4 in. Installs like a standard wedge anchor. Item dimensions: 2. 0"l x 4. 0"w x 4. 0"h. Country of Origin: United States. Galvanized for extra corrosion resistance. Brand name: Simpson Structural Screws. Designed for installation in Simpson Strong Tie Connectors As Well As Wood To Wood Applications. Made from 12 gauge steel.

Simpson structural Screws SD9112R100 No. 9 by 1-1/2-inch structural-connector Screw, 100-Pack Strong drive SDS Structural Wood Screws. 3/8-inch hex head. Versatile connector for various 90 degree connections and home repair projects. Ideal for hand rails, partitions, cabinets, window frames, shelves and pipe supports.

Steel construction. Item weight: 1. 0 lb. Shank is specifically designed to match the fastener holes in Simpson Strong-Tie connectors. Head is stamped with Simpson Strong Tie Stamp and fastener length for easy identification. No need for special bits or installation tools. 1/4-inch hex head drive reduces cam-out for easier installation.