Top 10 Clock Mechanism Replacement – Clocks

As an Amazon Associate I earn from qualifying purchases.

1. ULTNICE

 #ad

ULTNICE Quartz Clock Mechanism Battery Operated DIY Wall Clock Movement Repair Parts

#ad
ULTNICE #ad - Powered by 1 aa batterynot included, you can use No. 5 aa batteries, carbon batteries, alkaline batteries. Diameter: the minute hand shaft diameter is 3.

6mm, and the hour hand shaft diameter is 5. 5mm. Size: about 5. 5 x 5. 5 x 1. 5cm/2. 2 x 2. 2 x 06inch. Screw thread diameter 7. 6mm. For diy quartz wall clock replacement movement part, applicable framless 3D Wall clock. Warm tip: this model is an ordinary shaft of 5mm, which is suitable for clocks whose backplane thickness does not exceed 4mm, otherwise the nuts on the front cannot be tightened. Cannot Use Rechargeable Batteries. The error is less than +-1. 5 seconds/day, and the power consumption is less than 200 microamps. Shaft length: 1. 2 cm/05 in, screw thread length: 05 cm/02 in.
BrandULTNICE #ad
ManufacturerULTNICE #ad
Height0.63 Inches
Length2.2 Inches
Weight0.02 Pounds
Width2.2 Inches
Part Number21F2118PVNU

2. Mudder

 #ad

Mudder 31 mm Long Shaft Quartz Clock Movement DIY Clock Repair Kit Black

#ad
Mudder #ad - Wide application: they are fit for cross-stitch, frame-less draw clock, and specially suitable for DIY quartz wall clock replacement movement parts, craft clock, three-dimensional embroidery, etc.

7 mm 028 inch. 90 mm 3. 5 inch; minute hand is approx. Long spindle clock: good handwork DIY clock replacement movement parts with metal hook, which meet your installation needs. Movement size: shaft length is 31 mm 1-1/ 5 inch; thread length is 24. 6 mm 24/ 25 inch; jump second movement, suitable for 16 - 21 mm 5/ 8 - 4/ 5 inch thickness clock panel. Warm notice: when you install it, please keep the hour hand and minute hand parallel. Center of hole hand size: hour hand is approx. 120 mm 4. 7 inch; Second caps is approx.
BrandMudder #ad
ManufacturerMudder #ad
Weight0.09 Pounds
Part Number43216-77972

3. Quartex

 #ad

Quartz Clock Movement, Short Shaft 1/4" Dial Thickness, High Torque

#ad
Quartex #ad - Includes metal hanger and mounting hardware. Can handle quartz clock hands up to 17 inches. 5/16 threaded shaft length, 5/8 inch total hand shaft length. I-shaft compatible. 1/4 inch maximum clock face thickness. Hands and battery not included.
BrandQuartex #ad
ManufacturerQuartex #ad

4. Quartex

 #ad

Quartz Clock Movement, Clock Repair Kit -, High Torque, Extra Long Shaft

#ad
Quartex #ad - To request hands shown in photos, complete purchase and then send a message to the seller requesting the hands you want. 13/16 large threaded portion of shaft, 1 3/16 total hand shaft length. 3/4 inch maximum clock face thickness.
BrandQuartex #ad
Weight0.25 Pounds

5. Timelike

 #ad

Timelike 3D Clock Hands, DIY Large Clock Hands Needles Wall Clocks 3D Home Art Decor Quartz Clock Mechanism Accessories Silver

#ad
Timelike #ad - Powered by 1*AA batterynot including. Our products have been well tested, examined and packaged before sending off, but we cannot 100% guarantee the items remain undamaged when delivered to you. Hour hand length: 23. 5cm ; minute hand length: 31. 5cm; clock Dial: 104cm; material: alumnium. Any problem please feel free to contact us first so that we can supply the best service for you. Simple design: cool clock has an open design with just minute and hour hands. Make a statement by adding this funky clock to your home decor.
BrandTimelike #ad
ManufacturerTimelike #ad
Height14.5 Inches
Length5.4 Inches
Weight0.12 Pounds
Width1.7 Inches
Part NumberWall Clock

6. Plaid

 #ad

12766 4-Piece, Plaid Clock Movement Kit

#ad
Plaid #ad - Power source type: Battery Operated. Shaft is 1/2-Inch from movement. The product is of great value. Requires an AA battery not included. Great for repairing, replacing, or making a clock. Quartz operated movement.
BrandPlaid #ad
ManufacturerPlaid Enterprises, Inc. #ad
Height1.5 Inches
Length4.5 Inches
Weight0.18 Pounds
Width3.75 Inches
Part Number12766E
Model12766E

7. TIKROUND

 #ad

Youngtown 12888 Quartz DIY Wall Clock Movement Mechanism Battery Operated DIY Repair Parts Replacement,1/2 Inch Maximum Dial Thickness, 59/64 Inch Total Shaft Length.

#ad
TIKROUND #ad - Young town manufactures the 12888 series in various models, makesure the existing shaft and threads before ordering and you will get the right replacement.

Parameter: "i" shaft, drive long clock hands 10 mm to 450 mm; Total shaft length is 23. 5mm59/64 inch, thread length is 16mm5/8 inch. Applicable to cross-stitch, frameless draw clock, three-dimensional embroidery, craft clock, etc. Instructions - Included along with the movements. Long spindle quartz clock replacement movement parts with metal hook, Good for repairing, replacing or making a clock. High torque "i" shaft clock movement:suitable for suitable for 9-13 mm 23/64 - 1/2 inches thickness clock panel.
BrandTIKROUND #ad
ManufacturerTIKROUND #ad
Part NumberTIKROUND-M-040
ModelTIKROUND-M-040

8. Hicarer

 #ad

Hicarer 3-1/8 Inch 80 mm Quartz Clock Fit-up/Insert with Roman Numeral, Quartz Movement Gold Rim

#ad
Hicarer #ad - Power: 1. 5 v aa 1 x battery not included. Overall diameter: 3-1/8 inch 80 mm; fit round hold diameter mounting diameter: 3 inch 76 mm; Mounting depth: 07 inch 18 mm. Design: the 80 mm quartz clock insert with Roman numerals is designed with gold plastic rim and 2 hands. Big black roman numerals: the obvious comparison can make these numbers stand out, and people will get the time quickly. Clear cover with gold border: the gold plastic rim with quartz movement is good for DIY crafts or replacing old clock faces; And the clear cover allows for easily reading the time.
BrandHicarer #ad
ManufacturerHicarer #ad
Height1.18 Inches
Length3.15 Inches
Width3.15 Inches
Part NumberHicarer-Clock Fit-up-01

9. Mudder

 #ad

1/2 Inch Maximum Dial Thickness, 9/10 Inch Total Shaft Length Red, Mudder Long Spindle Quartz Clock Mechanism

#ad
Mudder #ad - Note: this clock doesn't contain hook, they can't hang directly; If the handle is too long, you can snip them as you want according to the size of the clock panel.

Jump second movement, suitable for 9 - 13 mm 9/ 25 - 1/ 2 inches thickness clock panel; Total shaft length: 23 mm 9/ 10 inches, thread length: 15. 4 mm 3/ 5 inches. Long spindle quartz clock replacement movement parts: the clock hand is rectangle shape, red color allow you to get the time even if you stand far away. Simple style clock movement: it can match to diverse colors, it will not stand out, shapes clock panel, patterns, good movement will work well. Wide application: you are enable to use it to repair, craft clock, frameless draw clock, three-dimensional embroidery, replace or make a clock; Applicable to cross-stitch, etc.
BrandMudder #ad
ManufacturerMudder #ad
Height0.63 Inches
Length2.17 Inches
Weight0.08 Pounds
Width2.17 Inches
Part NumberMudder-Quartz Clock-01

10. Yooyoo

 #ad

DIY Wall Clock Hands Motor Kit, 3D Clock Hands, Large Wall Clock Hands and Movements Set, Quartz Clock Mechanism Replacement Parts, Metal Needles and Mounting Cup, Home Art Decor AccessoriesSilver

#ad
Yooyoo #ad - Diy wall clock kits: includes the tapered style hour 12. 4" and minute hands（15. 4"）, clock movements, clock mechanism. Tips : please contact us if any problems, we will be responsible for our product and service. Power supply: 1 x 1. 5v aa battery not included. Enjoy the diy moment:you can design your clock and room according to your habits, add numbers, sayings, or more whatever you like! Share your design process with friends and family. Continuous Sweep Clock Movements operate virtually silently. Silent：this wall clock movement belongs to the scanning type.
BrandYooyoo #ad
ManufacturerYOOYOO #ad