As an Amazon Associate I earn from qualifying purchases.
DEWALT #ad - X 36 in. Crosscut capacity is ideal for cutting 6 in. For portablility to and from the jobsite. 15 amp motor provides 1220 MWO for demanding applications. 37 in. 28-7/8 in.
Over 30 in. Tile fully contained within water tray system, helping keep the work area clean and dry. 8-1/2 in. Rip cut capacity 41 in. Cuts. And 24 in. With plunge and 18 in. Sills and 8 in. Planks at a 30% offset. Cutting clearnace left of blade allows users to rip 36 in.
IQ Power Tools #ad - The iqts244 is 100% compliant with the new OSHA standard on respirable silica dust. Perfect for jobs inside or outside. The iqts244 is designed to cut ceramic, marble and stone. Q-drive blade with Cool Cut Technology cuts cool while reducing vibration and movement.
Fully integrated dust control: a revolutionary integrated dust containment system that captures 99. 5% of dust. Effortless setup & cleanup: finding a cutting location, setting up a water source with tarps and buckets, and disposing of slurry and contaminated water is a thing of the past.
With a 10” blade, porcelain, full-width table and 24" cut capacity, the iQTS244 can handle even the trickiest and most technical tile jobs. Combining the power of a top of the line tile saw with a powerful cyclonic vacuum that cuts clean, precise and efficiently to get the job done. Built for professional contractors: the 10” q drive blades offer an innovative design. One tool for any job: get the versatility you demand from tile tools.
1. MK Diamond
#adMK Diamond 156651 MK-215GL 7" x .050" x 5/8"
#adMK Diamond #ad - Design for reduced chipping and quieter operation. Metal bond formulation and diamond chip mix provide for chip free cutting of glass tiles, glass block and fused glass. Metal bond formulation and diamond chip mix also provides for the minimization or elimination of breakout.More information #ad
Provides good cutting speed and long blade life in abrasive materials. Supreme grade metal bond diamond blade for cutting glass. Fast cutting speed and long life.| Brand | MK Diamond #ad |
| Manufacturer | MK Diamond #ad |
| Height | 0.27 Inches |
| Length | 0 Inches |
| Weight | 0.55 Pounds |
| Width | 0.08 Inches |
| Part Number | 156651 |
| Model | 156651 |
More information #ad
2. MK Diamond
#adMK Diamond 137166 MK-200 10" x .060" x 5/8"
#adMK Diamond #ad - Will cut through any type of ceramic tile with minimal chipping. Wet cutting continuous rim tile blade. Item package Weight: 1. 15 lb. Item package dimension: 12. 5" l x 11. 8" w x 01" h.More information #ad
| Brand | MK Diamond #ad |
| Manufacturer | MK #ad |
| Height | 0.5 Inches |
| Length | 13 Inches |
| Weight | 2 Pounds |
| Width | 12 Inches |
| Part Number | 137166 |
| Model | 137166 |
| Warranty | Limited warranty |
More information #ad
3. MK Diamond
#adMK Diamond 158436 MK-225 10" x .050" x 5/8"
#adMK Diamond #ad - Design for reduced chipping and quieter operation. Provides good cutting speed and long blade life in abrasive materials. Fast cutting speed and long life.More information #ad
| Brand | MK Diamond #ad |
| Manufacturer | MK #ad |
| Height | 0.1 Inches |
| Length | 10.5 Inches |
| Weight | 0.75 Pounds |
| Width | 10.5 Inches |
| Part Number | 158436 |
| Model | 158436 |
| Warranty | Continuous Rim Blade Warranty: If the bond between the rim and the core fails during normal use, the blade will be replaced free of charge. Blades and bits damaged due to careless or improper use are not covered under this warranty. |
More information #ad
4. HITY MOTOR
#adNew OEM MK 154310 Tile Saw Switch MK-100 & MK-101 Tile Saws MK-100 & MK-101
#adHITY MOTOR #ad - With spade connectors. Fits models: mk-100 & MK-101. 125 vac / 20 amp toggle switch. Contact with us - if you have any questions about product ! Mk tile saw Switch. Includes Protective Boot.More information #ad
| Brand | HITY MOTOR #ad |
| Manufacturer | air compressor repl parts #ad |
| Part Number | 1 |
More information #ad
5. MK Diamond
#adMK Diamond 134577-MK Dual Flat 45 Degree Angle Guide
#adMK Diamond #ad - Fast cutting speed and long life. Provides good cutting speed and long blade life in abrasive materials. Design for reduced chipping and quieter operation.More information #ad
| Brand | MK Diamond #ad |
| Manufacturer | MK Diamond #ad |
| Height | 0.5 Inches |
| Length | 8.51 Inches |
| Weight | 1 Pounds |
| Width | 6 Inches |
| Part Number | 134577MK |
| Model | 134577-MK |
More information #ad
6. DEWALT
#adHigh Capacity, DEWALT Wet Tile Saw with Stand, 10-Inch D36000S
#adOver 30 in. Tile fully contained within water tray system, helping keep the work area clean and dry. 8-1/2 in. Rip cut capacity 41 in. Cuts. And 24 in. With plunge and 18 in. Sills and 8 in. Planks at a 30% offset. Cutting clearnace left of blade allows users to rip 36 in.
More information #ad
Tile in half. Door frames. X 48 in. 91 lbs. 18 in. Cutline indicator, rigid frame, and stainless-steel rollers provide cutting accuracy to within 1/32 in. Width from column to cart edge fits through standard 30 in. Compatible with d240001 Tile Saw Stand. X 24 in. Integrated storage for the cart extension, miter guide, and wrenches keeps accessories with the saw during transportation.| Brand | DEWALT #ad |
| Manufacturer | DEWALT #ad |
| Height | 21 Inches |
| Length | 31 Inches |
| Weight | 91 Pounds |
| Width | 30 Inches |
| Part Number | D36000S |
| Model | D36000S |
| Warranty | 3 year limited warranty/1 year free service contract/90 day money back guarantee |
More information #ad
7. IQ Power Tools
#adIQTS244 10" Dry Cut Tile Saw
#adFully integrated dust control: a revolutionary integrated dust containment system that captures 99. 5% of dust. Effortless setup & cleanup: finding a cutting location, setting up a water source with tarps and buckets, and disposing of slurry and contaminated water is a thing of the past.
More information #ad
Cut tile without water: never deal with the pain of cutting with a wet saw again! The iQRS244 offers easy transport, quick setup and breakdown with no slurry cleanup or water disposal. The iqts224 provides easy transport with quick setup and breakdown! The 92 cfm high output vacuum starts automatically. With a 10” blade, porcelain, full-width table and 24" cut capacity, the iQTS244 can handle even the trickiest and most technical tile jobs. Combining the power of a top of the line tile saw with a powerful cyclonic vacuum that cuts clean, precise and efficiently to get the job done. Built for professional contractors: the 10” q drive blades offer an innovative design. One tool for any job: get the versatility you demand from tile tools.
| Brand | IQ Power Tools #ad |
| Manufacturer | IQ Power Tools #ad |
| Weight | 93 Pounds |
| Part Number | iQTS244 |
| Model | iQTS244 |
More information #ad
