Top 9 Stamping Blanks Metal – Home & Kitchen Features

As an Amazon Associate I earn from qualifying purchases.

1. Beadsmith

#ad

3/16-Inch, Beadsmith 3-Piece 5mm Celestial Punch Set for Stamping Metal

#ad
Beadsmith #ad - Personalize metal blanks. Package dimensions : 07 inches H x 3. 2 inches L x 07 inches W. Made of steel. Quantity: 1 Set.
BrandBeadsmith #ad
ManufacturerBeadsmith #ad
Height0.5 Inches
Length3 Inches
Weight0.3 Pounds
Width0.5 Inches
Part NumberLPS015
ModelLPS015

2. ImpressArt

#ad

ImpressArt 1 Pound Metal Stamping Hammer

#ad
ImpressArt #ad - With a smaller, it provides easy handling and precision striking. Please note that brass hammers may flake when striking however, this prolongs the life of the stamp by taking the most of the hammer blow! Scaled down grip and 1 pound brass head ensures that every strike is accurate, resulting in a professional jewelry or leather DIY project.

Also works well with flattening wire for jewelry making. This hammer is great for the beginner and intermediate stamper. The sturdy and grooved grip allows for maximum force, precision strikes. The 1 pound head and grooved grip aids in striking metal stamps with the right amount of force, scaled down grip, every single time. Back side of the hammer head can be used as a ball peen for metal shaping, forming, and texturing. Brass heads are better than steel heads for metal stamping because brass evenly disperses the energy of the hit into the stamping blank.

Brass hammer head just under 1 pound in weight and the grip is roughly 7 inches long. This prevents double impressions and also provides longevity to your stamps and steel punches. The brass head helps to extend the life of your metal stamps by reducing wear and tear throughout each hand stamping project. Impressart's brass 1 pound metal stamping hammer was designed for metal stamping.
BrandImpressArt #ad
ManufacturerImpressArt #ad
Height8.2 Inches
Length1.2 Inches
Width5 Inches
Part NumberSC711
ModelSC711

3. VERBAY

#ad

VERBAY 6X6mm Metal Stamping Fixture Strike Jig Handguard Prolonged Simple Strike for DIY Jewelry Making Letter

#ad
VERBAY #ad - Simple strike jig is an easy-grip stamp holder that makes metal stamping easy. Protects your fingers from the path of the hammer, this is an essential tool for beginner metal stampers and DIY jewelry makers, as it protects your hands for future crafting. The jig is meant to keep stamps flush on stamping blanks and metal surfaces, promoting full impressions that are crisp and uniform. The fixture is designed to keep the stamping blank and metal surface neat and stable, ensuring a complete pattern and protecting your fingers from the hammer path.
BrandVERBAY #ad
ManufacturerVERBAY #ad
Part Number473713

4. angwang

#ad

Angwang Punch Stamp,36 Pcs/Set DIY Crafts Tool Steel Punches Flower Punch Stamp Set Jewelry Metal Stamping Tools

#ad
angwang #ad - Removed the jewelery blanks. Wash in the ultrasonic cleaning machine, use a hair to clean the gypsum powder. When the gold and silver to complete melt, become optimum flow state, use die sludge depressed quickly.

Put the material into the plaster moldbowl, by welding machine suit or tiger skin suit before heating the mold, heating the raw material and add a little borax. After one minute of gold and silver and other liquid solidification. Gently tapping the plaster mold with a hammer, plaster mold until the crack. Jewelry finishing shape chain type need to be welding, Finally, deal with the gold drum by agate polishing machine or hand-polished.
Brandangwang #ad
Manufacturerangwang #ad
Part Numberangwang

5. Tiamu

#ad

Tiamu 6X6mm Metal Stamping Fixture Strike Jig Handguard Prolonged Simple Strike for DIY Jewelry Making Letter

#ad
Tiamu #ad - The jig is meant to keep stamps flush on stamping blanks and metal surfaces, promoting full impressions that are crisp and uniform. Protects your fingers from the path of the hammer, this is an essential tool for beginner metal stampers and DIY jewelry makers, as it protects your hands for future crafting. The fixture is designed to keep the stamping blank and metal surface neat and stable, ensuring a complete pattern and protecting your fingers from the hammer path. Simple strike jig is an easy-grip stamp holder that makes metal stamping easy.
BrandTiamu #ad
ManufacturerTiamu #ad
Part Number473713

6. Eurotool

#ad

Eurotool EuroPunch 1.25mm Round Hole Punch Pliers for Sheet Metal

#ad
Eurotool #ad - These hole punch pliers will punch copper or silver as thick as 18 gauge. Punch pin is 1. 25mm in diameter and will create 1. 25mm round holes. Will create a clean 1. 25mm hole without rough edges or burs in sheet metal stock. Measurements: pliers are 5 1/4" long.
BrandEurotool #ad
ManufacturerBeadaholique #ad
Height3.75 Inches
Length6.75 Inches
Weight0.25 Pounds
Width0.75 Inches
Part NumberPLR-133.60
ModelPLR-133.60

7. ImpressArt

#ad

ImpressArt SCDESIGN-1518D Cross Outline Design Stamps, 6 mm

#ad
ImpressArt #ad - Precision-cut from hardened steel. Size of the actual stamped impression ranges from 3mm to 7mm depending on the design. Each stamp has a 2-1/2 inch long shaft that is clearly labeled on one edge.
BrandImpressArt #ad
ManufacturerIMPRESS ART #ad
Height4 Inches
Length0.5 Inches
Weight0.1 Pounds
Width2 Inches
Part NumberSCDESIGN-1518D
ModelSCDESIGN-1518D

8. ImpressArt

#ad

Chasing, 2" X 2", Shaping, Jewelers Bench Block for Stamping, & Flattening Metals, ImpressArt, Solid Steel Bench Block w/ Rubber Feet

#ad
ImpressArt #ad - Surface: 2" x 2" - height: 3/8" - all surfaces are ground flat, which promotes precision metal stamping, hardened, and smoothly polished, helping your DIY crafts reach an elevated look.

Great for metal stamping blanks/ jewelry tags, flattening, shaping, laying-out, and for chasing, and stamping metal and other hard material. Constructed of solid carbon steel - this steel bench block is highly resistant to scratching, marring, making it a perfect jeweler’s bench block for metal stamping, and dents, and working with soft metals. Small steel metal stamping block – an essential jewelry stamping tool created by ImpressArt, the leader in metal stamping supplies. Solid steel bench block includes rubber feet for surface grip, shock absorption, and noise reduction when metal stamping.
BrandImpressArt #ad
ManufacturerImpressArt #ad
Height2 Inches
Length0.2 Inches
Weight0.47 Pounds
Width2 Inches
Part NumberSC22-SM
ModelSC22-SM

9. ImpressArt

#ad

ImpressArt- Whimsy Heart Design Stamp, 3mm

#ad
ImpressArt #ad - Impression Size: 3mm. For stamping soft metals including brass, copper, nickel silver, gold, clay, aluminum as well as wood, sterling silver, and matte board.
BrandImpressArt #ad
ManufacturerImpressArt #ad
Height4 Inches
Length0.5 Inches
Weight0.04 Pounds
Width2 Inches
Part NumberSCDESIGN-158K
ModelSCDESIGN-158K